Goliath & Semi Goliath Cranes

J.Barnsley goliath & semi-goliath cranes are explosion protected for use in Zone 1 or Zone 2 hazardous areas worldwide. Available in different capacities upto 100Te they are designed to run on forged wheels running on rails either at ground or a predetermined level. Goliath & Semi-Goliath cranes are suitable for control from floor level, by means of a pendant controller suspended from the crane bridge or by radio control.

CATEGORY

11 2 G & 3 G according to 94/9/EC (ATEX 100a & 95)

STANDARDS

Goliath and semi-goliath cranes are designed and manufactured in accordance with the following standards;

  • BS: 466 1984 /BS 2573 1983, Part 1 and 1980 Part 2
  • BS EN 13001-2:2014
  • DD CEN/TS 13001-3-2
  • DIN 1508 H2 B3. & FEM
  • Supply of Machinery (Safety) Regulations, 1992 (S.I. 1992/3073)

FEATURES

  • Motors and electrical systems in ignition protection mode
  • Flameproof enclosures: Ex de IIB/IIC T4 & Ex ndeA IIB/C T3
  • Hooks and ferrous-to-ferrous items in non-sparking materials.

SPECIFICATION

  • Visual and audio warning on crane operation
  • Technically mature special-purpose cranes and hoists providing customised solutions
  • Professional Support for all documentation requirements
  • Certification in line with ATEX, IECEx, GOST, CSA
  • Cranes suitable for Safe Area’s, Zones 1, 2, 21 and 22
 
 
Explosion Protected Zone 1 and Zone 2 Approved

GOLIATH CRANES

There are several advantages to using a goliath crane. Goliath cranes are more easy to dismantle for relocation to another site. They also remove the need to purchase expensive new supporting stanchions, excess steel work and foundations for columns approximately every 6 meters. Due to the design of goliath cranes they also provide more room for work operations such as forklift movement around the site.

It is quite common for our goliath cranes to be fitted with two crab units to allow for tandem lifts. In situations with ultra-wide loads this keeps the weight spread across the span of the crane.

SEMI-GOLIATH CRANES

Semi-goliath cranes excel when used with a building or vessel which can only support a crane at high level one one side. While one side runs on ground rails the other side will be supported by steel work at a pre-determined level.

RANGE

Standard Crane Types
Capacity (Te)
Span (m)

Goliath Crane

0.5 < 100

Up to 20

Semi-Goliath Crane

0.5 < 25

20